A novel formulation of triethyl orthoformate mediated durable, smart and antibacterial chitosan cross-linked cellulose fabrics.

Antibacterial, durable and smart cotton fabrics was developed using chitosan-based formulation. The cellulose was covalently cross-linked with chitosan using TEOF. The antibacterial activity of prepared smart fabrics and CS was studied against S. aureus and E. coli strains. The FTIR, SEM and XRD were employed to confirm the linkage of CS molecules with cellulose in cotton fabrics. The CS of 160 KDa extracted from shrimp shell showed the optimum antibacterial activity. The prominent asymmetric, symmetric alkyl CH peaks of CS were shifted to 2930 and 2845 (cm-1), respectively. Moreover, the shifted peaks at 1590 and 1400 (cm-1) indicate the CO stretching and NH2 bending bands of CS, respectively. This confirm the existence of new imine functional group that was generated after cross-linking of NH2 groups of CS. The SEM results showed more uniform morphology of TEOF cross-linked fabrics versus CS coated fabrics, which revealed a promising microbial growth inhibition activity. The TEOF as a cross-linker has been unveiled, showcasing the effectiveness of this innovative crosslinking approach. The fabric treated with cross-linked CS exhibited remarkable antibacterial properties that endured even after undergoing 30 washing cycles. These antibacterial textiles possess substantial commercial potential across a diverse range of industries.

Biodegradable and hemocompatible alginate/okra hydrogel films with promising stability and biological attributes.

Currently, combinations of natural polymers and semi-synthetic biomolecules have gained attention for food-packaging, drug delivery, coatings, and biomedical applications. In this work, cross-linking property of two biopolymers was employed for the fabrication of hydrogel films. Sodium alginate (SAlg) and Okra gel (OkG) were used in different ratios (95:05, 75:25 and 85:15) to synthesize hydrogel films by solvent-casting method. Formation of the films was confirmed by FTIR and Raman techniques which specified the interaction between biomolecules of SAlg and OkG. XRD pattern has shown the presence of both amorphous and micro-crystalline phases in the hydrogel films and SEM studies have shown porosity, amorphousness and agglomerated morphology. TGA and DSC analyses revealed degradation of the film at 420 °C and stability studies using PBS buffer indicated stability and hydrophilic nature of hydrogel films. In-vitro degradation test was also performed for 10 weeks through the incubation of hydrogel-films in simulated body fluid and the effect of pH and temperature was also studied. Results have shown worth-some influence of okra gel on the fabricated films. Hemolytic and antioxidant activities of the gels were also determined and being non-toxic, all these ratios were found suitable for biomedical applications; especially 85:15 have shown maximum potential.

Molecular dynamics simulation of thermo-mechanical behaviour of elastomer cross-linked via multifunctional zwitterions.

Coarse-grained (CG) molecular dynamics simulations have been employed to study the thermo-mechanical response of a physically cross-linked network composed of zwitterionic moieties and fully flexible elastomeric polymer chains. In this work, we used the effective Lennard-Jones interactions for our bead-spring model of zwitterionic cross-linkers (ZCLs). The effects of ZCL functionality, its chain length and the attractive interaction strength (ε) of end-groups on the thermo-mechanical properties are explored. We developed one particular system with versatile functionality of ZCLs at constant molecular weight with variable functional sites, observing that the stress-strain curve is increased with the functionality, evidenced by the bond orientation through the second-order Legendre polynomials. In the case of the length of the tri-functional ZCL, we found that a shorter length leads to a higher modulus and a relatively greater value of glass-transition temperature (Tg). In addition, we found that with the increase of the attractive interaction strength (ε) on the tri-functional ZCL, the stress-strain behaviour and the chain orientation are reinforced, accompanied by an enhancement of Tg. Lastly, we examined the effect of the cross-linker functionality on the tension-recovery process, as well as the fracture behaviour, by performing the typical tri-axial deformation. The results of tension-recovery and tri-axial deformation correspondingly proved the presence of physical linkages of end-groups, and strong attractive forces between end-linking groups were revealed through visual molecular dynamics (VMD) analysis. Generally, we anticipate that our work could provide some guidelines for the rational design and preparation of high performance zwitterionic cross-linked elastomeric materials.

Sapium sebiferum leaf extract mediated synthesis of palladium nanoparticles and in vitro investigation of their bacterial and photocatalytic activities.

There is a growing need to introduce eco-friendly and sustainable procedures for the synthesis of metal nanoparticles that include a mild reaction conditions, simple reaction setup, use of nontoxic medium such as water and plant extract, cost effectiveness as well as greater efficiency for biomedical and catalytic applications. For this purpose, small and highly dispersed palladium nanoparticles (PdNPs) were prepared by eco-friendly and cost effective green method using water soluble leaf extract of Sapium sebiferum as a reducing and capping agent. The formation of PdNPs was optimized at various temperatures i.e. (30°C, 60°C and 90°C) and different leaves extract (5mL and 10mL) in order to control their size and shape. The results indicated that PdNPs synthesized at 10mL leaf extract concentration and 60°C temperature have small sized (5nm) and spherical shape. The nanoparticles formation, their dispersion, size and shape were confirmed by various characterization techniques i.e. UV-Vis spectroscopy, Fourier-transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), thermo gravimetric analysis (TGA) and Dynamic light scattering technique (DLS) analysis. The biologically synthesized PdNPs were tested for size dependent photo degradation of methylene blue and inactivation of bacteria. The PdNPs synthesized at optimized condition (10mL extract concentration and 60°C) have strong photo catalytic activity and reduced 90% methylene blue in 70min. The optimized PdNPs also showed strong bacterial inhibition against Staphylococcus aureus 29(±0.8mm), Bacillus subtilis 19(±0.6mm) and pseudomonas aeruginosa 11(±0.6mm). The results of this examination demonstrate effective applications of extremely active PdNPs.

Performance behavior of modified cellulosic fabrics using polyurethane acrylate copolymer.

The surface of the cellulosic fabrics was modified using self-prepared emulsions of polyurethane acrylate copolymers (PUACs). PUACs were prepared by varying the molecular weight of polycaprolactone diol (PCL). The PCL was reacted with isophorone diisocyanate (IPDI) and chain was extended with 2-hydroxy ethyl acrylate (HEA) to form vinyl terminated polyurethane (VTPU) preploymer. The VTPU was further co-polymerized through free radical polymerization with butyl acrylate in different proportions. The FT-IR spectra of monomers, prepolymers and copolymers assured the formation of proposed PUACs structure. The various concentrations of prepared PUACs were applied onto the different fabric samples using dip-padding techniques. The results revealed that the application of polyurethane butyl acrylate copolymer showed a pronounced effect on the tear strength and pilling resistance of the treated fabrics.